Clamp braces consist of two steel tubes with cuplock fittings at each end, which are designed to be installed on cuplock verticals. The brace tubes are connected using a swivel clamp, which allows for adjustment to the desired angle.
Cuplock braces clamp are engineered to resist lateral loading on scaffolding – mainly caused by winds – preventing it from swaying or buckling under the weight of workers, equipment, and materials.
|
Code |
Description |
Material |
Finish |
|
CCB0914 |
Clamp Brace 3'(914mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 |
H.D.G/Powder Coating |
|
CCB1219 |
Clamp Brace 4'(1219mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB1524 |
Clamp Brace 5'(1524mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB1830 |
Clamp Brace 6'(1830mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB2130 |
Clamp Brace 7'(2130mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB2440 |
Clamp Brace 8'(2440mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB2500 |
Clamp Brace 8'2"(2500mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB2570 |
Clamp Brace 8'6"(2570mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB2740 |
Clamp Brace 9'(2740mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
|
CCB3050 |
Clamp Brace 10'(3050mm) × 2.0M |
48.3mmφ × 2.5mmT, Q235/Q355 | H.D.G/Powder Coating |
Leave a Reply