AEM209 Variable Area Air Flowmeters Analog Input Flow Rate Totalizer Re-Programmable OEM Customization ABS Material Thread

AEM290 intelligent flow totalizer controller collects, displays, controls, transmits, communicatesand prints various signals, forming a digital acquisition and control system.

Description

https://www.anjuncn.com/aem209-variable-area-air-flowmeters-analog-input-flow-rate-totalizer-re-programmable-oem-customization-abs-material-thread.html

Product Name: Intelligent Flow Totalizer / Flow Integrator Controller
Model: AEM290
Panel Dimensions: 160 × 80 mm
Display Type: 128 × 64 Backlit Graphic LCD
Signal Compatibility: 4–20mA, 0–10mA, Pulse, Frequency, Pt100 and Thermocouple
Communication Interfaces: RS232, RS485 and Ethernet
Customization: OEM Configuration Available
Minimum Order Quantity: 1 Unit

Product Overview

The AEM290 Intelligent Flow Totalizer is a versatile industrial monitoring and control instrument engineered for precise flow measurement, accumulated volume calculation, energy monitoring and process data management.

Developed with microprocessor-based digital technology, this programmable flow integrator receives signals from compatible flowmeters, temperature sensors and pressure transmitters. It processes measurement data and presents key operating parameters through an easy-to-read LCD interface.

The instrument is suitable for monitoring liquid flow, gas consumption, saturated steam, superheated steam and thermal energy systems. Integrated temperature and pressure compensation functions support more accurate flow calculations under varying operating conditions.

In addition to continuous measurement, the AEM290 provides configurable alarm outputs, batch control capabilities, data recording and communication functions. It can be incorporated into centralized monitoring systems to support industrial automation, utility management and energy accounting.

With multiple signal input options, a flexible communication architecture and programmable operating parameters, this flow totalizer offers a practical solution for OEM manufacturers, automation contractors, system integrators and industrial equipment suppliers.

AEM209 Flow Totalizer Controller Variable Area Meter

Key Features and Operational Benefits

1. Comprehensive Flow and Energy Monitoring

The AEM290 combines instantaneous flow indication, cumulative flow measurement and energy calculation in a single digital instrument.

Depending on the selected configuration and connected sensors, operators can monitor flow rate, total consumption, temperature, pressure, density, heat enthalpy and other process variables.

This integrated approach simplifies monitoring and reduces the need for multiple standalone display instruments.

2. High-Visibility Digital Display

Equipped with a 128 × 64 dot-matrix LCD featuring backlight illumination, the instrument provides clear presentation of measurement values and operating information.

Its automatic cyclic display function enables users to review different parameters without repeatedly navigating through menus.

Displayable information includes:

  • Instantaneous and accumulated flow

  • Thermal energy and power

  • Medium temperature and pressure

  • Density and enthalpy

  • Differential pressure

  • Input current and frequency

  • Date, time and alarm conditions

3. Broad Sensor and Signal Compatibility

The controller accepts several commonly used industrial signals, including analog current inputs, pulse signals, resistance temperature detectors and thermocouples.

This makes it adaptable to a wide range of flow measurement equipment and temperature or pressure transmitters.

Available signal options help simplify integration with new installations and existing process control systems.

4. Temperature and Pressure Compensation

For applications involving compressible gases or steam, changes in temperature and pressure may influence measurement results.

The AEM290 supports compensation calculations using relevant operating parameters, helping provide corrected flow measurements for gas and steam monitoring.

This function is particularly useful in industrial energy consumption measurement and utility distribution systems.

5. Programmable Batch Measurement and Control

The instrument supports quantitative control operations for applications requiring preset flow quantities or controlled material transfer.

Start, stop and reset functions allow operators to manage measurement cycles according to process requirements.

Optional relay outputs can also be used for configurable upper and lower alarm conditions.

6. Industrial Communication and System Integration

The AEM290 offers communication capabilities designed for connection with computers and industrial monitoring networks.

Supported interface options include RS232, RS485 and Ethernet. Additional communication arrangements may include GPRS, CDMA and broadband network connectivity, depending on system configuration.

These functions facilitate integration into industrial data acquisition, centralized metering and energy management applications.

7. Historical Data Storage and Metering Management

For facilities requiring traceable consumption records, the instrument provides data storage and management functions.

Features include:

  • Daily accumulated value storage for up to 365 days

  • Monthly accumulated value storage for up to 12 months

  • Automatic meter reading at preset intervals

  • Power interruption records

  • Unauthorized operation history queries

  • Real-time and scheduled printing

These capabilities support utility accounting, consumption analysis and routine operational reporting.

8. Secure and Reliable Instrument Design

The controller incorporates a three-level password system to restrict access to important settings.

Its internal electronic design eliminates traditional adjustable potentiometers and encoder switches, improving resistance to vibration and reducing the possibility of mechanical adjustment instability.

Additional protective features include a watchdog reset mechanism, low-voltage reset, self-recovering fuse and short-circuit protection.

Technical Specifications

Measurement Inputs

Parameter Specification
Analog Current Input 0–10mA / 4–20mA
Input Impedance ≤250Ω
RTD Input Pt100
Thermocouple Types K, E, B, J, N, T, S
Pulse Input Waveforms Rectangular, sine and triangular
Pulse Signal Amplitude Greater than 4V
Frequency Input Range 0–10kHz
Special Input Requirements Available upon request

Output and Communication

Parameter Specification
Analog Output DC 0–10mA / DC 4–20mA
0–10mA Output Load ≤750Ω
4–20mA Output Load ≤500Ω
Communication Interfaces RS232 / RS485 / Ethernet
Baud Rate 600, 1200, 2400, 4800, 9600bps
Serial Data Format 8 data bits, 1 stop bit, 1 start bit
Relay Output Up to 2 optional alarm relays
Relay Rating AC 220V/3A or DC 24V/6A, resistive load
Sensor Supply Output DC 24V, ≤100mA
Alternative Supply Output DC 12V, ≤200mA

Measurement and Display Performance

Parameter Specification
Measurement Accuracy 0.2% FS ±1 digit or 0.5% FS ±1 digit
Frequency Conversion Accuracy ±1 pulse (LMS), better than 0.2%
Flow and Compensation Display Range -999999 to 999999
Totalized Value Range 0 to 99999999.9999
LCD Resolution 128 × 64 pixels
Display Technology Backlit dot-matrix graphic LCD
Alarm Types Flow, temperature and pressure high/low limits
Alarm Adjustment Configurable hysteresis
Alarm Indication LCD and LED indicators

Power Supply and Environmental Conditions

Parameter Specification
Standard Power Supply AC 220V, 50Hz ±2Hz
Wide-Range AC Supply Option AC 80–265V
DC Power Option DC 24V ±1V
Alternative AC Option AC 36V, 50Hz ±2Hz
Backup Power 12V, 20Ah
Backup Operating Duration Up to 72 hours
Power Consumption ≤10W
Operating Temperature -20°C to +60°C
Relative Humidity ≤85% RH
Installation Environment Avoid highly corrosive gases
Totalizer Data Retention More than 20 years without power

Note: Certain power supply, output, communication and control functions depend on the instrument configuration. Confirm the required options before purchasing.

Typical Industrial Applications

Water Supply and Liquid Process Monitoring

Suitable for monitoring liquid flow and cumulative consumption in water distribution, industrial processing, liquid transfer and utility metering applications.

Natural Gas and Industrial Gas Metering

Supports gas flow measurement applications where temperature and pressure compensation are required for improved measurement consistency.

Steam Distribution and Energy Management

Designed for saturated and superheated steam systems, enabling flow accumulation, thermal energy monitoring and consumption recording.

HVAC and Building Utility Management

Can be integrated into centralized heating, cooling and energy monitoring installations to support measurement and operational data collection.

Industrial Automation and Batch Processing

Provides measurement display, preset quantity control and relay alarm functions for various automated process applications.

OEM Equipment and System Integration

Its programmable parameters, multiple input options and communication interfaces make it suitable for incorporation into customized industrial equipment and metering systems.

Data Logging, Printing and Protection Functions

The AEM290 offers additional functions intended for applications requiring continuous monitoring and documented measurement records.

Scheduled Meter Reading: Automatic data capture can be configured to support periodic consumption reporting.

Serial Printer Connection: An RS232 interface allows connection to a compatible serial thermal printer for immediate or timed printouts. Up to eight scheduled printing operations can be configured per day.

Non-Volatile Data Storage: Accumulated measurement data can be maintained for more than 20 years after power interruption.

Operational Security: Multi-level password authorization and operation history records help control access to critical instrument settings.

Automatic Recovery: Internal monitoring and protection features support stable operation during abnormal system conditions.

Frequently Asked Questions

Q1: What is the purpose of an intelligent flow totalizer?

An intelligent flow totalizer is an electronic instrument that processes flow sensor signals to calculate instantaneous flow and accumulated consumption. Depending on the instrument configuration, it may also provide energy calculations, alarms, compensation functions and communication capabilities.

Q2: Can this controller be connected to different flowmeter types?

Yes. The AEM290 supports standard industrial input signals such as 4–20mA, 0–10mA and pulse/frequency inputs. It also accepts Pt100 and several thermocouple signal types, allowing connection to compatible measuring devices.

Q3: Does the instrument support gas and steam flow applications?

Yes. It can be used in various gas and steam measurement systems, including saturated steam and superheated steam applications. Temperature and pressure compensation functions are available for suitable measurement configurations.

Q4: What measurement accuracy can be expected?

The listed instrument accuracy is 0.2% FS ±1 digit or 0.5% FS ±1 digit, depending on the selected specification. Frequency conversion performance is specified as better than 0.2%.

Overall system accuracy also depends on the connected sensors, installation conditions and calibration.

Q5: Is remote monitoring possible?

The controller provides communication interface options including RS485, RS232 and Ethernet. These can be used for connection to compatible host computers or industrial monitoring systems. The applicable communication protocol should be confirmed for the selected configuration.

Q6: Can accumulated flow records be saved during a power failure?

Yes. The instrument features non-volatile storage designed to retain totalized data for more than 20 years without electrical power. It also provides power interruption records for operating history review.

Q7: Can the controller activate an alarm when flow exceeds a preset value?

Yes. Optional relay outputs support configurable high and low alarm limits. Alarm monitoring is available for flow, temperature and pressure, with adjustable hysteresis to help prevent unnecessary switching.

Q8: How are operating parameters configured?

Instrument parameters can be adjusted through the front-panel controls. Password protection is provided to help prevent unauthorized changes. Additional configuration methods depend on the supplied model and interface options.

Q9: Is the instrument suitable for continuous industrial use?

The AEM290 is designed for industrial monitoring applications, with watchdog protection, automatic reset functions, short-circuit protection and non-volatile storage. Its specified ambient operating temperature is -20°C to +60°C.

Q10: What information is needed when requesting an OEM quotation?

To select a suitable configuration, buyers should provide the application medium, sensor signal type, required measurement functions, communication interface, power supply and expected order quantity.